Supply of Button Bits ball, ball-type drill head gear manufacturer 
 To properly use ball Button Bits, Button Bits ball to ensure the normal wear and tear scrapped, should note the following points: 
 1, according to the rock conditions (hardness, corrosion), drilling method (open air, underground, boring drilling, production drilling, anchor holes drilled), ranked powder media (compressed air, high pressure water), rock drill (heavy, light, air, hydraulic) Select the drill head. Different way of cloth gear, row powder method is applicable to different sites. Typical ball Button Bits and recommended the annex. Select the correct drill head, is a prerequisite for maximum drilling speed! 
 2, when opening steady, rock drilling machine operating parameters must be reduced to prevent overloading a single tooth, causing broken teeth, lost teeth; 
 3, according to the rock, and adjust the drilling machine operating parameters, and without jamming, fast drilling speed, drill rod bend as the standard to adjust the impact, propulsion, rotation parameters. Can also be measured with the drill rod solder tail connection to set the temperature to judge: the case of the powder with water discharge normal temperature ≤ 40 ℃, the case through the normal air discharge temperature powder ≤ 70 ℃; 
 Note: Bits in use should not stop without water or air, or very vulnerable to heat caused by drill head drill hair broken teeth, lost teeth and lead to failure. 
 4, the first solder ball gear after a certain time after the operation, the first solder alloy should be regularly wear of tooth and shell inspection. When they find a larger shell alloy teeth or wear and tear, it should promptly make use of relevant tools for grinding, so as not to affect the drilling speed and prevent the drill head inverted cone lead to jamming. If the alloy tooth and shell serious wear out the teeth and to avoid breakage caused by waste drill hole head-body, should be promptly replaced with new drill head.